Pressure pot Conversion Kit
The Blast Wash Pressure Pot Conversion Kit can be added to Blast Wash Dry Blast Cabinet to covert them into a pressure cabinet with an enhanced flow of media. The pressure pot connects to the bottom of your existing blasting cabinet.
Designed and manufactured in Northamptonshire, the Blast Wash Pressure Pot Conversion Kits are finished with the same white powder coating as the Blast Wash Dry Blast Cabinets to provide a seamless and aesthetically pleasing component.
From £1,800 +VAT
Enquire About This ProductCall Us: +44 (0) 1604 811505
Product Specifications
The Blast Wash Pressure Pot Conversion Kit features a steep cone shape compared to rounder pressure pot designs to ensure a consistent feed of media through the saunders valve to provide enhanced results.
The increased force from the media will allow you to work faster and remove stubborn surface contaminants, such as paint, powder coating, rusting and much more.
Enquire About This ProductCall Us: +44 (0) 1604 811505
Product Applications
When used with the Blast Wash Dry Blast Cabinets, the Pressure Pot Conversion Kit can enhance surface finishing on the following applications:
- Alloy Wheel Refurbishment
- Classic Car & Motorcycle Part Restoration
- Engine Remanufacture and Preparation
- Marine Applications
- Precision Engineering
- Aviation & Aerospace
- Many Other Surface Treatment Applications
Enquire About This ProductCall Us: +44 (0) 1604 811505
Product Features
Ventrui blast cabinets operate through suction and draws the media out to blast against the components to remove residue. Suction/ventrui blast cabinets are slower than pressure blast cabinets so it can take longer to remove stubborn surface residue.
By adding a pressure pot to your blast cabinet it can increase the flow of the pressure and in turn increase the flow of the media, speeding up the removal of residue on components. Pressure blast kits seal and build pressure, provided by the compressor. The pressurised air and media is shot out of the nozzle with more force.
Enquire About This ProductCall Us: +44 (0) 1604 811505
Installation Requirements
The Blast Wash Pressure Pot Conversion Kit is compatible with both Blast Wash Dry Blast Cabinets as well as other branded ventrui and suction blast cabinets to convert them to a pressure based cabinet.
Enquire About This ProductCall Us: +44 (0) 1604 811505
